Prise en charge matérielle – Nautilus® CC plus

Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.

Updates for Nautilus® CC plus
The software versions available in the casting unit can be called up using the F3 ley
(call up "Software info")

From year 2012

Software updates for Nautilus® units with touchscreen – from year 2012
Software updates Version Size Language 1.34 6,66 MB German 1.34 6,65 MB English

Year to 2012

Software updates for Nautilus® units without touchscreen – year to 2012
Firmware Version Size Language 1.22 430 KB Deutsch 1.22 430 KB Englisch

The Firmware controls the basic functions of the casting unit.


The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.

  Version Siize Language 2.1 6,72 MB German 2.1 6,93 MB English

Driver for the card reader

Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.

Driver for the card reader
  Version Size Language 20.08.2005 776 KB German/English


The Serviceware provides analytical tools for service technicians.

  Version Size Language 1.12 428 KB German 1.12 428 KB English


Version 1.06: 

  • Additional function: "Check O-ring seals"
    ATTENTION: Requires language version V 1.07. or higher!


This database for alloys only concerns BEGO alloys. When the update is copied on the casting unit, all customer data for non-BEGO alloys are preserved.

  Version Size Language 1.06 410 KB German 1.06 410 KB English


The database for languages controls the display messages of the casting unit.

  Version Size Language 1.10 415 KB German 1.10 415 KB English


Download and installation on PC

  • Click on the download link and save the file in the target folder of your choice.
  • Decompress the file with a suitable program (e.g. WinZip).
  • Start the installation program by clicking on the file with the extension "exe".Important (concerns ''CastControl''): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.
  • Follow the instructions of the installation program

Installation on the Nautilus® CC plus
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.

Software on CD-ROM
A CD-ROM with the CastControl software can be ordered using order number 16259.

Phone +49 421 2028-270 (international), +49 421 2028-270 (Germany)

Disclaimer of liability

The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.

Contact service

Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG
Wilhelm-Herbst-Str. 1
28359 Bremen

+49 421 2028-270 (international)
+49 421 2028-270 (Germany)


Hardware service BEGO