Prise en charge matérielle – Nautilus® CC plus
Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.
Updates for Nautilus® CC plus
The software versions available in the casting unit can be called up using the F3 ley
(call up "Software info")
The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.
Driver for the card reader
Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.
The Serviceware provides analytical tools for service technicians.
- Additional function: "Check O-ring seals"
ATTENTION: Requires language version V 1.07. or higher!
Download and installation on PC
- Click on the download link and save the file in the target folder of your choice.
- Decompress the file with a suitable program (e.g. WinZip).
- Start the installation program by clicking on the file with the extension "exe".Important (concerns ''CastControl''): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.
- Follow the instructions of the installation program
Installation on the Nautilus® CC plus
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.
Software on CD-ROM
A CD-ROM with the CastControl software can be ordered using order number 16259.
Phone +49 421 2028-270 (international), +49 421 2028-270 (Germany)
Disclaimer of liability
The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.
Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG
+49 421 2028-270 (international)
+49 421 2028-270 (Germany)